Ford Model: focus 1.6 tdci 2010 UK/Ireland I was driving home from Manchester the other day and my engine malfunction light came on and the car would go into limp Changed the fuel filter on my 1.6 tdci focus , (the filter with the module on top ) I've filled the filter with diesel , used a Home made fuel primer to get the fuel to come through the lines. However no fuel seems to come from the common rail injector nuts when loosened off. I own a 2011 Mk2 Focus - 1.6 TDCI engine. I'm currently having problems when accelerating hard or when climbing hills. The car will enter limp mode and an Engine Malfunction light appears of the dash. If I turn the car off and on, it will reset and drive normally again. Current DTC codes; P0299 and P0490. Ford Model: Ford Focus 1.6 TDCI Titanium X Ford Year: Rear interior light. How to reset Engine malfunction warning? Wasn't actually an engine malfunction symbol that iluminated - the words came up on the LED in the centre of the instrument cluster. Got a diagnostic check carried out and one fault code appeared - 'P1204 Cylinder No.4 injector open/short circuit.' C-max 2012. My car displayed the engine malfunction, service now 2 weeks ago, 3 miles from home. I was only doing a short trip and when I returned to the car the message had gone. A week later it happened again and went in to limp mode. I took it for a diagnostic check and it showed no faults and no faults stored. Ford Focus 2 Facelift 1.6Tdci 110Cp 2009 Settings. In this video, I'll show you how to reset the Engine Malfunction Warning Message on my 09 Ford Focus. This simple procedure is similar to one (2008 Ford Focus 1.6 TDCI) Also just to note I had my DPF completely cleaned out 6 months ago at around 100,000 miles after getting the engine malfunction light Vay Tiền Trả Góp 24 Tháng.

ford focus 1.6 tdci engine malfunction light